Display Part P1000

- p1000 - P1000 - 1-5/8" x 1-5/8", 12 Gage Channel, Solid


Column Loading - P1000
Unbraced Height (in)	Allowable Load at Slot Face (lbs)	Max Column Load Applied at C.G.
Unbraced Height (in)	Allowable Load at Slot Face (lbs)	K=0.65 (lbs)	K=0.80 (lbs)	K=1.0 (lbs)	K=1.2 (lbs)
24	3,550	10,740	9,890	8,770	7,740
36	3,190	8,910	7,740	6,390	5,310
48	2,770	7,260	6,010	4,690	3,800
60	2,380	5,910	4,690	3,630	2,960
72	2,080	4,840	3,800	2,960	2,400
84	1,860	4,040	3,200	2,480	1,980
96	1,670	3,480	2,750	2,110	1,660
108	1,510	3,050	2,400	1,810	*
120	1,380	2,700	2,110	*	*
144	1,150	2,180	1,660	*	*
*KL/r > 200


Beam Loading - P1000
Span (in)	Max Allow. Uniform Load (lbs)	Defl at Uniform load (in)	Uniform Loading at Deflection			Lateral Bracing Reduct. Factor
Span (in)	Max Allow. Uniform Load (lbs)	Defl at Uniform load (in)	Span /180 (lbs)	Span /240 (lbs)	Span /360 (lbs)	Lateral Bracing Reduct. Factor
24	1,690	0.06	1,690	1,690	1,690	1.00
36	1,130	0.13	1,130	1,130	900	0.94
48	850	0.22	850	760	500	0.88
60	680	0.35	650	480	320	0.82
72	560	0.50	450	340	220	0.78
84	480	0.68	330	250	160	0.75
96	420	0.89	250	190	130	0.71
108	380	1.14	200	150	100	0.69
120	340	1.40	160	120	80	0.66
144	280	2.00	110	80	60	0.61
168	240	2.72	80	60	40	0.55
192	210	3.55	60	50	-	0.51
216	190	4.58	50	40	-	0.47
240	170	5.62	40	-	-	0.44

Notes:

Above loads include the weight of the member.
This weight must be deducted to arrive at the net allowable load the beam will support.
Long span beams should be supported so as to prevent rotation and twist.
Allowable uniformly distributed loads are listed for various simple spans, that is, a beam on two supports. If load is concentrated at the center of the span, multiply load from the table by 0.5 and corresponding deflection by 0.8.
The lateral bracing factor should be multiplied by the load to determine the load retained based on the distance between lateral braces.

Bearing Load on Channel:


Max Load 5,000 Lbs 2,268 Kg	Max Load 8,000 Lbs 3,629 Kg	Max Load 3,500 Lbs 1,588 Kg