- P2452 - Brace
Hole Diameter: 9/16" (14mm)
Hole Spacing (From End): 13/16" (21mm)
Hole Spacing (On Center): 1-7/8" (48mm)
Width: 1-5/8" (41mm)
Thickness: 1/4" (6.4mm) with steel meeting or exceeding
ASTM A1011 SS GR 33, or
0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
Material: 1/4" (6.4) thick steel.
Design Axial Load 1200 Lbs (5.34 kN)
©2013 Atkore International, Inc. All Rights Reserved