- p5000 - P5000T - 1-5/8" x 3-1/4", 12 Gage, Slotted


P5000T
Channel Selection Chart
Related Channel Nuts
Additional Specifications

Part No. Finish Length Weight
P5000T
GR
10
300.00
P5000T
GR
20
300.00
P5000T
PG
10
300.00
P5000T
PG
20
300.00
P5000T
HG
10
318.00
P5000T
HG
20
318.00
P5000T
ZD
10
300.00
P5000T
PL
10
300.00
P5000T
PL
20
300.00
Elements of Section - P5000T
Area of
Section
0.897 in2 (5.8 cm2)
 
Axis 1-1
Axis 2-2
Moment of
Inertia (I)
1.098 in4 (45.7 cm4)
0.433 in4 (18.0 cm4)
Section
Modulus (S)
0.627 in3 (10.3 cm3)
0.533 in3 (8.7 cm3)
Radius of
Gyration (r)
1.107 in (2.8 cm )
0.695 in (1.8 cm )
Column Loading - P5000T
  
Please contact factory for loading information
Beam Loading - P5000T
85% of non pierced channel

Notes:

  1. Above loads include the weight of the member.
    This weight must be deducted to arrive at the net allowable load the beam will support.

  2. Long span beams should be supported so as to prevent rotation and twist.

  3. Allowable uniformly distributed loads are listed for various simple spans, that is, a beam on two supports. If load is concentrated at the center of the span, multiply load from the table by 0.5 and corresponding deflection by 0.8.

  4. The lateral bracing factor should be multiplied by the load to determine the load retained based on the distance between lateral braces.

Bearing Load on Channel:

Max Load
4,000 Lbs
1,814 Kg
Max Load
5,500 Lbs
2,495 Kg
Max Load
2,000 Lbs
907 Kg