- Special Application - SPF400 - 3/8" Seismic Pivot Fitting

SPF400



SPF400 2



SPF400 3


FINISH Electro-galvanized (EG), conforming to ASTM B633 Type III SC1.
Safety factor - 3
1. Allowable loads have been determined by the manufacturers testing, analysis and technical specifications.
2. Galvanized wire rope, 7 x 19 IWSC, RHRL (Prestretched).
3. Torque on nut/spacer:50 ft-lbs.
4. Safety Factor of 3 for prestreched cable..


Part No. Finish Weight
SPF 400-037
EG
0.00
SPF 400-050
EG
0.00
SPF 400-062
EG
0.00
SPF 400-075
EG
0.00

Standard Dimensions:

  • Hole Diameter: 9/16" (14mm)

  • Hole Spacing (From End): 13/16" (21mm)

  • Hole Spacing (On Center): 1-7/8" (48mm)

  • Width: 1-5/8" (41mm)

  • Thickness: 1/4" (6.4mm) with steel meeting or exceeding
    ASTM A1011 SS GR 33, or

    0.220" (5.6mm) with steel meeting or exceeding
    ASTM A1011 HSLAS GR 45

Note:

  • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

Additional Specifications