A1001B - 1-1/4" x 2-1/2", 14 Gage Channel, Combination

A1001B-No-Dimensions.png
Add to Project Download
Resources
Download
Cut Sheet
Part No. Length (ft) Finish Product Weight / Ft (lbs/ft)
A1001B 10 PG 2.07
A1001B 20 PG 2.07
A1001B 10 HG 2.205
A1001B 20 HG 2.205
A1001B 20 GR 2.07
A1001B 10 GR 2.07
A1001B 20 PL 2.07
A1001B 10 PL 2.07

    Elements of Section

    Elements of Section - A1001B
    Area of Section 0.609 in2 (3.9 cm2)
    Axis 1-1 Axix 2-2
    Moment of Inertia (I) 0.394 in4 (16.4 cm4) 0.126 in4 (5.2 cm4)
    Section Modulus (S) 0.315 in3 (5.2 cm3) 0.201 in3 (3.3 cm3)
    Radius of Gyration (r) 0.804 in (2 cm) 0.454 in (1.2 cm)

    General Specifications

    Standard Lengths:

    • 10 feet:  10' or 10’ 1/8” (3.05m) ± 1/2" (13 mm)
    • 20 feet:  20' or 20’ 3/8” (6.11m) ± 1/2" (13 mm)

    Load Data:

    • All beam and column load data pertains to carbon steel and stainless steel channels.
    • Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
    • Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
    • Loads are based on 33 ksi steel cold formed to 42 ksi.
    • Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
    • Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
    • For bearing loads, reference our bearing loads page.

    Welds:

    • Welded channels are spot welded 2" (51 mm) or 3" (76 mm) on-center. 

    Materials & Finishes

    Materials & Finishes - Standard:

    • Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
    • Unistrut Defender (DF):  Conforms to ASTM A1046 SS GR 33
    • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
    • Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
    • Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
    • Plain (PL):  Conforms to ASTM A1011 SS GR 33
    Materials & Finishes - Special Metals:
    • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
    • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
    • Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.