P3006 thru P3013 - Channel Nuts w/o Spring (1-5/8" Series)

P3006-No-Dimensions.png
Add to Project Download
Cut Sheet
Part No. Use With Thread Size Finish Product Weight / Piece (lbs)
P3006-0832 Any Channel #8-32 EG 0.06
P3006-1024 Any Channel #10-24 EG 0.06
P3006-1420 Any Channel 1/4"-20 EG 0.06
P3006-1420 Any Channel 1/4"-20 DF 0.07
P3006-1420 Any Channel 1/4"-20 HG 0.07
P3006M6 Any Channel M6 EG 0.07
P3006U1420 Any Channel 1/4"-20 SS 0.07
P3007 Any Channel 5/16"-18 EG 0.06
P3007M8 Any Channel M8 EG 0.06
P3008 Any Channel 3/8"-16 EG 0.09
P3008 Any Channel 3/8"-16 DF 0.1
P3008 Any Channel 3/8"-16 HG 0.1
P3008U Any Channel 3/8"-16 SS 0.1
P3009 Any Channel 7/16"-14 EG 0.09
P3010 Any Channel Except P3300, P4000, P4400, P4100 1/2"-13 EG 0.11
P3010 Any Channel Except P3300, P4000, P4400, P4100 1/2"-13 DF 0.11
P3010 Any Channel Except P3300, P4000, P4400, P4100 1/2"-13 HG 0.11
P3010M12 Any Channel Except P3300, P4000, P4400, P4100 M12 EG 0.11
P3010U Any Channel Except P3300, P4000, P4400, P4100 1/2"-13 SS 0.11
P3013 P3300, P4000, P4400, P4100 1/2"-13 EG 0.08
P3013 P3300, P4000, P4400, P4100 1/2"-13 DF 0.08
P3013M12 P3300, P4000, P4400, P4100 M12 EG 0.08

    Design Loads


    Notes:
    1. Design loads apply only to Unistrut brand products. Look for "UNISTRUT" on the part.
    2. The loads in the above table do not apply to Stainless Steel and Aluminum Channel Nuts. Contact us for design assistance.

    General Specifications

    Threads:

    • Threads meet the Unified Screw Thread standard, ANSI B1.1, coarse series (UNC) class 2.
    • Channel Nuts are also available in many standard metric sizes. Contact us for ordering information. 

    Design Bolt Torque:

    Bolt Torque Table

    Materials & Finishes

    Materials:

    • Unistrut Channel Nuts are manufactured from mild steel cold rolled coil, and after stamping and machining operations are completed, they are case hardened, assuring positive biting action into the inturned edge of the Unistrut Channel.
    • 1/4" & 5/16" Sizes:  Conforms to ASTM A1011 SS GR 33
    • 3/8", 7/16"1/2" Sizes:  Conforms to ASTM A576 GR 1015 Modified
    • 5/8",  3/4" & 7/8"Sizes:  Conforms to ASTM A36 or A675 GR 60

    Finishes:

    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC3
    • Unistrut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A153
    ---------------------------------------------------------------------------------

    Materials & Finishes - Special Metals:

    • Stainless Steel, Type 316 (SS):  ASTM A240, Type 316 *
    • Aluminum (AL): Stainless Steel nuts are recommended for Aluminum channel.

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Related Resources

    Videos

    Technical Documents