P3352 thru P3353 - Concrete insert (8 in - 12 in)

P3352-No-Dimensions.png
Add to Project Download
Cut Sheet

    Design Loads

    Part Number Insert Length
    in or ft (mm)
    Max. Allowable Point Load
    lbs (kN)
    Min. Spacing of Point Loads
    in (mm)
    Max. Allowable Uniform Load
    lbs (kN)
     Max. Allowable Uniform Load
    lbs/ft (kg/m)
    P3352 8"  (203.2) 1,000  (4.45) -
    1,000  (4.45) -
    P3353 12"  (304.8) 1,500  (6.67) -
    1,500  (6.67) -
    Notes:
    1. Design loads are based on 3,000 PSI concrete, unless noted otherwise.
    2. Safety Factor = 3.0

    Load Criteria








    General Specifications

    Specifications:

    • Includes closure and end caps unless otherwise requested.
    • P3380 end cap used with distance to first anchor is up to 2" (51 mm).
    • P3703 end cap is used when end distance to first anchor is over 2" (51 mm).
    • Nail or anchor inserts to forms every 16" (406.4 mm) to 24" (609.6 mm).
    • Anchors are 8" (203.3 mm) on center. 

    Options:

    • "NC" Suffix - No Closure Strip, with End Caps & Back Plates
    • "WC" Suffix - With Closure Strip, End Caps & Back Plates
    • "X" Suffix - No Closure Strip, no End Caps, with Back Plates

    Materials & Finishes

    Materials & Finishes - Standard:

    • Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
    • Unistrut Defender (DF):  Conforms to ASTM A1046 SS GR 33
    • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
    • Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
    • Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
    • Plain (PL):  Conforms to ASTM A1011 SS GR 33
    Materials & Finishes - Special Metals:
    • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
    • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
    • Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Related Resources

    Videos

    Technical Documents