P2008 thru P2020 - One Hole O.D. Tubing Clamp

P2008-No-Dimensions.png
Add to Project Download
Cut Sheet
Part No. O.D. Size Finish Product Weight / Piece (lbs)
P2008 1/4" (6.4) EG 0.04
P2008 1/4" (6.4) HG 0.042
P2008 1/4" (6.4) SS 0.04
P2009 5/16" (7.9) EG 0.05
P2009 5/16" (7.9) HG 0.053
P2009 5/16" (7.9) SS 0.05
P2010 3/8" (9.5) EG 0.05
P2010 3/8" (9.5) HG 0.053
P2010 3/8" (9.5) SS 0.05
P2012 1/2" (12.7) EG 0.06
P2012 1/2" (12.7) HG 0.064
P2012 1/2" (12.7) SS 0.06
P2014 5/8" (15.9) EG 0.08
P2014 5/8" (15.9) HG 0.085
P2014 5/8" (15.9) SS 0.08
P2016 3/4" (19.1) EG 0.09
P2016 3/4" (19.1) HG 0.095
P2016 3/4" (19.1) SS 0.09
P2018 7/8" (22.2) EG 0.1
P2018 7/8" (22.2) HG 0.106
P2018 7/8" (22.2) SS 0.1
P2020 1" (25.4) EG 0.11
P2020 1" (25.4) HG 0.117
P2020 1" (25.4) SS 0.11

    Seismic Design Loads


    P2008 thru P2020
    Allowable (Design) Loads
    (lbs)
    Pullout Slip Along Slip Thru
    40 30 0

    Notes:
    1. Design loads only apply to UNISTRUT brand products. Look for "UNISTRUT" on the part.
    2. Design loads are based on static testing with a safety factor = 5 based on ultimate strength of connection.
    3. Appropriate Unistrut Bolt and Channel Nut required for connection to strut.

    General Specifications

    Installation:

    • Torque:

    Note: When tightening 1/4" screws used with a two piece pipe clamp, a torque of 5 ft-lbs (60 in-lbs) should be used.

    Materials & Finishes

    Material:

    • The steel meets or exceeds the physical properties of ASTM A1011 GR 33, except with SS, ST & AL finishes.
    Finishes:
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Unistrut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1
    • Copper Coated (CC):  TBD
    • Everdur (E EG): TBD
    • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
    • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
    • Aluminum (AL): TBD

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Material & Finish Combinations:

    Material / Finish
    Part Number
    Suffix
    Pipe Clamp
    Material / Finish
    Fasteners (Screw & Nut)
    Material / Finish
    Example
    Electro-galvanized
    EG
    EG
    EG
    P1109 EG
    Hot-dipped galvanized
    HG
    HG
    SS
    P1109 HG
    Unistrut Defender
    DF
    DF
    DF
    P1109 DF
    Stainless Steel Type 304
    SS
    SS
    SS
    P1109 SS
    Stainless Steel Type 316
    ST
    ST
    SS
    P1109 ST
    Aluminum
    AL
    AL
    AL
    P1109 AL
    Copper Coated
    CC
    CC
    CC
    P1109 CC
    Everdur
    E EG
    EG
    E
    P1109E EG
     

    Related Resources

    Videos

    Technical Documents