P2474 - Pipe Roller for 1/2" thru 4" Pipe (Obsolete)
Part No. | Finish | Product Weight / Piece (lbs) |
---|---|---|
P2474 | EG | 2.68 |
P2474 | HG | 2.71 |
P2474 | GR | 2.68 |
Design Loads
Design Load = 500 lbs
Notes:
- Design loads only apply to Unistrut brand products. Look for "UNISTRUT" on the part.
- Safety factor = 2.5 based on the ultimate strength of the connection when mounted to 12 gauge channel.
- Requires 2 each 1/2" Channel Nuts and Bolts (not included).
- Sold in pairs.
Dimension "A"
Chart for Dimension A -P2474 | |||||||
---|---|---|---|---|---|---|---|
Pipe Size in |
No Insulation in (mm) |
Insulation Thickness | |||||
1" in (mm) |
1-1/2" in (mm) |
2" in (mm) |
2-1/2" in (mm) |
3" in (mm) |
4" in (mm) |
||
1/2" | 6-1/2" (165.1) | 6-1/2" (165.1) |
- | - | - | - | - |
3/4" | 6-1/2" (165.1) |
6-1/2" (165.1) |
6-5/8" (168.3) |
6-7/8" (174.6) |
- | - | - |
1" | 6-1/2" (165.1) |
6-1/2" (165.1) |
6-5/8" (168.3) |
6-7/8" (174.6) |
- | - | - |
1-1/4" | 6-1/2" (165.1) |
6-1/2" (165.1) |
6-7/8" (174.6) |
7-1/8" (181.0) |
7-3/8" (187.3) |
- | - |
1-1/2" | 6-1/2" (165.1) |
6-1/2" (165.1) |
6-7/8" (174.6) | 7-1/8" (181.0) |
7-3/8" (187.3) |
- | - |
2" | 6-1/2" (165.1) |
6-5/8" (168.3) |
7-1/8" (181.0) |
7-3/8" (187.3) |
7-1/2" (190.5) |
8" (203.2) |
- |
2-1/2" | 6-1/2" (165.1) |
6-5/8" (168.3) |
7-1/8" (181.0) |
7-3/8" (187.3) |
7-1/2" (190.5) |
8" (203.2) |
- |
3" | 6-1/2" (165.1) |
7" (177.8) |
7-1/2" (190.5) |
7-3/4" (196.9) |
7-7/8" (200.0) |
8-1/8" (206.4) |
- |
3-1/2" | 6-1/2" (165.1) |
7" (177.8) |
7-1/2" (190.5) |
7-3/4" (196.9) |
7-7/8" (200.0) |
8-1/8" (206.4) |
- |
4" | 6-5/8" (168.3) |
7-1/4" (184.2) |
7-5/8" (193.7) |
7-7/8" (200.0) |
8" (203.2) |
8-3/8" (212.7) |
9" (228.6) |
Pipe & Conduit Reference Data
General Specifications
Standard Dimensions (Unless Shown Otherwise on Drawing):
- Hole Diameter: 9/16" (14mm)
- Hole Spacing (From End): 13/16" (21mm)
- Hole Spacing (On-Center): 1 7/8" (48mm)
- Width: 1 5/8" (41mm)
- Thickness:
- 1/4" (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
- 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45
Note:
- When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.
Materials & Finishes
Materials & Finishes
- Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
- Rollers: Cast Iron
- Electrogalvanized (EG): Conforms to ASTM B633, Type III SC1
- Hot Dip Galvanized (HG): Conforms to ASTM A123 or A153
- Perma-Green (GR): Conforms to commercial standards for powder coating