P2476 - Pipe Roller for 16" thru 24" Pipe

P2476-No-Dimensions.png
Add to Project Download
Resources
Download
Cut Sheet
Part No. Finish Product Weight / Piece (lbs)
P2476 EG 10.46
P2476 HG 10.53
P2476 GR 10.46

    Design Loads

    Design Load = 2,000 lbs

    Notes:

    1. Design loads only apply to Unistrut brand products. Look for "UNISTRUT" on the part.
    2. Safety factor = 2.5 based on the ultimate strength of the connection when mounted to 12 gauge channel.
    3. Requires 4 each 1/2" Channel Nuts and Bolts (not included).
    4. Sold in pairs.

    Dimensions

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes

    • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
    • Rollers:  Cast Iron
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Green (GR):  Conforms to commercial standards for powder coating