P2491 thru P2493 - 6" to 10" Bracket (1-5/8" Series)

P2491-No-Dimensions.png
Add to Project Download
Cut Sheet
Part No. A B Finish Product Weight / Piece (lbs)
P2491L 6" (152.4) 1-15/16" (49.2) EG 0.67
P2491L 6" (152.4) 1-15/16" (49.2) GR 0.67
P2491R 6" (152.4) 1-15/16" (49.2) EG 0.67
P2491R 6" (152.4) 1-15/16" (49.2) GR 0.67
P2492L 8" (203.2) 2-7/16" (61.9) EG 0.92
P2492L 8" (203.2) 2-7/16" (61.9) GR 0.92
P2492R 8" (203.2) 2-7/16" (61.9) EG 0.92
P2492R 8" (203.2) 2-7/16" (61.9) GR 0.92
P2493L 10" (254.0) 2-15/16" (74.6) EG 1.27
P2493L 10" (254.0) 2-15/16" (74.6) GR 1.2
P2493R 10" (254.0) 2-15/16" (74.6) EG 1.27
P2493R 10" (254.0) 2-15/16" (74.6) GR 1.2

    Design Loads


    Notes:

    1. Safety factor = 2.5 based on the ultimate strength of the connection.

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes - Standard:

    • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Unistrut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Green (GR):  Conforms to commercial standards for powder coating
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1
    • Plain (PL):  No finish 

    Materials & Finishes - Special Metals:

    • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
    • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
    • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Related Resources

    Videos

    Technical Documents