P2494 thru P2499 - 12" to 22" Bracket (1-5/8" Series)

P2494-No-Dimensions.png
Add to Project Download
Cut Sheet
Part No. A B Finish Product Weight / Piece (lbs)
P2494L 12" (305) 3-7/16" (87) HG 1.611
P2494L 12" (305) 3-7/16" (87) GR 1.52
P2494R 12" (305) 3-7/16" (87) HG 1.611
P2494R 12" (305) 3-7/16" (87) GR 1.52
P2495L 14" (356) 3-15/16" (100) HG 1.834
P2495L 14" (356) 3-15/16" (100) GR 1.73
P2495R 14" (356) 3-15/16" (100) HG 1.834
P2495R 14" (356) 3-15/16" (100) GR 1.73
P2496L 16" (406) 4-7/16" (113) HG 2.37
P2496L 16" (406) 4-7/16" (113) GR 2.23
P2496R 16" (406) 4-7/16" (113) HG 2.364
P2496R 16" (406) 4-7/16" (113) GR 2.23
P2496R 16" (406) 4-7/16" (113) PL 2.23
P2497L 18" (457) 4-15/16" (125) HG 2.65
P2497L 18" (457) 4-15/16" (125) GR 2.66
P2497R 18" (457) 4-15/16" (125) HG 2.65
P2497R 18" (457) 4-15/16" (125) GR 2.66
P2498L 20" (508) 5-7/16" (138) GR 3.08
P2498R 20" (508) 5-7/16" (138) HG 3.26
P2498R 20" (508) 5-7/16" (138) GR 3.08
P2499L 22" (559) 5-15/16" (151) HG 3.66
P2499L 22" (559) 5-15/16" (151) GR 3.55
P2499R 22" (559) 5-15/16" (151) HG 3.66
P2499R 22" (559) 5-15/16" (151) GR 3.55

    Design Loads

    Design Loads - P2494 thru P2499
    Vertical Channel Part Number Vertical Channel Gauge Uniform Design Load
    lbs (kN)
    P1000 12 300  (1.33)
    P1100 14 250  (1.11)
    P2000
    16 200  (0.89)

    Notes:

    1. Safety factor = 2.5 based on the ultimate strength of the connection.

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes - Standard:

    • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Unistrut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Green (GR):  Conforms to commercial standards for powder coating
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1
    • Plain (PL):  No finish 

    Materials & Finishes - Special Metals:

    • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
    • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
    • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Related Resources

    Videos

    Technical Documents