P2513 thru P2516 - 6" thru 24" Bracket (Slot Up) (1-5/8" Series)

P2513-No-Dimensions.png
Add to Project Download
Cut Sheet
Part No. A Finish Product Weight / Piece (lbs)
P2513 6" (152.4) HG 1.707
P2513 6" (152.4) GR 1.61
P2513 6" (152.4) SS 1.61
P2514 12" (304.8) HG 2.767
P2514 12" (304.8) GR 2.61
P2514 12" (304.8) SS 2.61
P2515 18" (457.2) HG 3.827
P2515 18" (457.2) GR 3.61
P2515 18" (457.2) SS 3.61
P2516 24" (609.6) HG 4.887
P2516 24" (609.6) GR 4.61
P2516 24" (609.6) SS 4.61

    Design Loads

    Design Loads - P2513 thru P2516
    Part Number Length "A"
    in (mm)
    Vertical Channel Part Number  Vertical Channel Gauge Uniform Design Load
    lbs (kN)
    P2513
    6" (152.4) P1000 12 1,200 (5.34)
    P1100 14 800 (3.56)
    P2000 16 600 (2.67)
    P2514 12" (304.8) P1000 12 600 (2.67)
    P1100 14 400 (1.78)
    P2000 16 300 (1.33)
    P2515 18" (457.2) P1000 12 400 (1.78)
    P1100 14 270 (1.20)
    P2000 16 200 (0.89)
    P2516 24" (609.6) P1000 12 300 (1.33)
    P1100 14 200 (0.89)
    P2000 16 150 (0.67)

    Notes:

    1. Design loads only apply to Unistrut brand products. Look for "UNISTRUT" on the part.
    2. Safety factor = 2.5 based on the ultimate strength of the connection.

    General Specifications

    Standard Dimensions (Unless Shown Otherwise on Drawing):

    • Hole Diameter:  9/16"  (14mm)
    • Hole Spacing (From End):  13/16"  (21mm)
    • Hole Spacing (On-Center):  1 7/8"  (48mm)
    • Width:  1 5/8"  (41mm)
    • Thickness:
    • 1/4"  (6.4mm) with steel meeting or exceeding ASTM A1011 SS GR 33, or
    • 0.220" (5.6mm) with steel meeting or exceeding ASTM A1011 HSLAS GR 45

    Note:

    • When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping.

    Materials & Finishes

    Materials & Finishes - Standard:

    • Base Metal: Steel conforms to ASTM A1011 SS GR 33, A1011 HSLAS GR 45, A36, A575, A576, or A635.
    • Electrogalvanized (EG):  Conforms to ASTM B633, Type III SC1
    • Unistrut Defender (DF):  Conforms to ASTM A1059
    • Hot Dip Galvanized (HG):  Conforms to ASTM A123 or A153
    • Perma-Green (GR):  Conforms to commercial standards for powder coating
    • Perma-Gold (ZD):  Conforms to ASTM B633, Type II SC1
    • Plain (PL):  No finish 

    Materials & Finishes - Special Metals:

    • Stainless Steel, Type 304 (SS):  Conforms to ASTM A240 or A276, Type 304 *
    • Stainless Steel, Type 316 (ST):  Conforms to ASTM A240 or A276, Type 316 *
    • Aluminum (AL):  Conforms to ASTM B209, Type 1100F or 5052-H32 *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Related Resources

    Videos

    Technical Documents