P3354 thru P3370 - Concrete Inserts (16 in - 20 ft)

P3354-No-Dimensions.png
Add to Project Download
Cut Sheet

12 Gauge Concrete Insert (Channel Style)

Unistrut's P3300 Series Concrete Insert is ideal for anchoring structures and supports to concrete. This product allows easy installation before the concrete is poured, and attachment anywhere along its length using 1-5/8" Fittings, Channel Nuts or other products. It is perfect for applications that may need to be re-configured or re-anchored.

This product may be used for anchorage on ceilings, floors or walls. Being a pre-pour installation, it is ideal for applications with cracked concrete concerns and avoids the creation of Silica Dust during installation (see OSHA 29 CFR §1926.1153 and 29 CFR §1910.1053).

Channel dimensions are 1 5/8" wide x 7/8" deep x 12 ga. thick. Embedment tabs are spaced at 8" O.C. and have an embedment depth of 2-3/8". The product may be supplied with Back Plates, End Caps and a Closure Strip to prevent concrete seepage into the channel, per the options below. 

Our P3300 Series is available in Pre-Galvanized (PG), Hot-Dip Galvanized (HG), Plain (PL), and Stainless Steel (SS or ST).

Options:

  • "NC" Suffix - No Closure Strip, with End Caps & Back Plates
  • "WC" Suffix - With Closure Strip, End Caps & Back Plates
  • "X" Suffix - No Closure Strip, no End Caps, with Back Plates
Part No. Length (ft) Finish Product Weight / Piece (lbs)
P3354NC 16" (406) PG 1.85
P3354NC 16" (406) PL 1.85
P3354WC 16" (406) PG 1.85
P3354WC 16" (406) PL 1.85
P3355NC 20" (508) PG 2.31
P3355NC 20" (508) PL 2.31
P3355WC 20" (508) PG 2.31
P3355WC 20" (508) PL 2.31
P3356NC 24" (610) PG 2.77
P3356NC 24" (610) PL 2.77
P3356WC 24" (610) PG 2.77
P3356WC 24" (610) PL 2.77
P3357ANC 36" (914) PG 4.16
P3357ANC 36" (914) PL 4.16
P3357AWC 36" (914) PG 4.16
P3357AWC 36" (914) PL 4.16
P3357NC 32" (813) PG 3.7
P3357NC 32" (813) PL 3.7
P3357NC 32" (813) SS 3.83
P3357WC 32" (813) PG 3.7
P3357WC 32" (813) PL 3.7
P3358NC 40" (1,016) PG 4.63
P3358NC 40" (1,016) PL 4.63
P3358WC 40" (1,016) PG 4.63
P3358WC 40" (1,016) PL 4.63
P3359NC 4 Ft. (1,219) PG 5.55
P3359NC 4 Ft. (1,219) PL 5.55
P3359WC 4 Ft. (1,219) PG 5.55
P3359WC 4 Ft. (1,219) PL 5.55
P3360NC 5 Ft. (1,524) PG 6.94
P3360NC 5 Ft. (1,524) PL 6.94
P3360WC 5 Ft. (1,524) PG 6.94
P3360WC 5 Ft. (1,524) PL 6.94
P3360X 5 Ft. (1,524) SS 5.57
P3361NC 6 Ft. (1,829) PG 8.32
P3361NC 6 Ft. (1,829) PL 8.32
P3361WC 6 Ft. (1,829) PG 8.32
P3361WC 6 Ft. (1,829) PL 8.32
P3361X 6 Ft. (1,829) PG 8.79
P3361X 6 Ft. (1,829) SS 8.79
P3362NC 7 Ft. (2,134) PG 9.71
P3362NC 7 Ft. (2,134) PL 9.71
P3362WC 7 Ft. (2,134) PG 9.71
P3362WC 7 Ft. (2,134) PL 9.71
P3363NC 8 Ft. (2,438) PG 11.1
P3363NC 8 Ft. (2,438) PL 11.1
P3363WC 8 Ft. (2,438) PG 11.1
P3363WC 8 Ft. (2,438) PL 11.1
P3363X 8 Ft. (2,438) PG 11.59
P3364NC 9 Ft. (2,743) PG 12.49
P3364NC 9 Ft. (2,743) PL 12.49
P3364WC 9 Ft. (2,743) PG 12.49
P3364WC 9 Ft. (2,743) PL 12.49
P3365NC 10 Ft. (3,048) PG 13.87
P3365NC 10 Ft. (3,048) PL 13.87
P3365WC 10 Ft. (3,048) PG 13.87
P3365WC 10 Ft. (3,048) PL 13.87
P3365WC 10 Ft. (3,048) SS 14.8
P3366NC 12 Ft. (3,658) PG 16.65
P3366NC 12 Ft. (3,658) PL 16.65
P3366WC 12 Ft. (3,658) PG 16.65
P3366WC 12 Ft. (3,658) PL 16.65
P3366X 12 Ft. (3,658) PG 17.92
P3367NC 14 Ft. (4,267) PG 19.42
P3367NC 14 Ft. (4,267) PL 19.42
P3367WC 14 Ft. (4,267) PG 19.42
P3367WC 14 Ft. (4,267) PL 19.42
P3368NC 16 Ft. (4,877) PG 22.2
P3368NC 16 Ft. (4,877) PL 22.2
P3368WC 16 Ft. (4,877) PG 22.2
P3368WC 16 Ft. (4,877) PL 22.2
P3368X 16 Ft. (4,877) PG 23.36
P3369NC 18 Ft. (5,486) PG 24.97
P3369X 18 Ft. (5,486) SS 26.14
P3370NC 20 Ft. (6,096) PG 27.75
P3370NC 20 Ft. (6,096) PL 27.75
P3370W 20 Ft. (6,096) SS 27
P3370WC 20 Ft. (6,096) PG 27.75
P3370WC 20 Ft. (6,096) PL 27.75
P3370X 20 Ft. (6,096) PG 29.6
P3370X 20 Ft. (6,096) HG 31.38
P3370X 20 Ft. (6,096) PL 29.6
P3370X 20 Ft. (6,096) SS 29.8
P3370X 20 Ft. (6,096) ST 29.8

    Design Loads

    Part Number Insert Length
    in or ft (mm)
    Max. Allowable Point Load
    lbs (kN)
    Min. Spacing of Point Loads
    in (mm)
    Max. Allowable Uniform Load
    lbs (kN)
     Max. Allowable Uniform Load
    lbs/ft (kg/m)
    P3354 16"  (406.4) 1,500  (6.67)
    12"  (304.8) 3,000  (13.34) -
    P3355 20"  (508.0) 1,500  (6.67)
    12"  (304.8)
    3,000  (13.34)
    -
    P3356 24"  (609.6) 1,500  (6.67)
    12"  (304.8)
    3,000  (13.34)
    -
    P3357 32" (812.8) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3357A 36"  (914.4) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3358 40"  (1,016.0) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3359 4'  (1,219.2) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3360 5'  (1,524.0) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3361 6'  (1,828.8) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3362 7'  (2,133.6) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3363 8'  (2,438.4) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3364 9'  (2,743.2) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3365 10'  (3,048.0) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3366 12'  (3,657.6) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3367 14'  (4,267.2) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3368 16'  (4,876.8) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3369 18'  (5,486.4) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    P3370 20'  (6,096.0) 1,500  (6.67)
    12"  (304.8)
    - 1,500  (2,232.2)
    Notes:
    1. Design loads are based on 3,000 PSI concrete, unless noted otherwise.
    2. Safety Factor = 3.0

    Load Criteria








    General Specifications

    Specifications:

    • Includes closure and end caps unless otherwise requested.
    • P3380 end cap used with distance to first anchor is up to 2" (51 mm).
    • P3703 end cap is used when end distance to first anchor is over 2" (51 mm).
    • Nail or anchor inserts to forms every 16" (406.4 mm) to 24" (609.6 mm).
    • Anchors are 8" (203.3 mm) on center. 

    Options:

    • "NC" Suffix - No Closure Strip, with End Caps & Back Plates
    • "WC" Suffix - With Closure Strip, End Caps & Back Plates
    • "X" Suffix - No Closure Strip, no End Caps, with Back Plates

    Materials & Finishes

    Materials & Finishes - Standard:

    • Pregalvanized (PG):  Conforms to ASTM A653 SS GR 33, G90.
    • Unistrut Defender (DF):  Conforms to ASTM A1046 SS GR 33
    • Hot Dip Galvanized (HG):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
    • Perma-Green (GR):  Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
    • Perma-Gold (ZD):  Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
    • Plain (PL):  Conforms to ASTM A1011 SS GR 33
    Materials & Finishes - Special Metals:
    • Stainless Steel, Type 304 (SS):  ASTM A240, Type 304 *
    • Stainless Steel, Type 316 (ST):  ASTM A240, Type 316 *
    • Aluminum (EA):  ASTM B221, Type 6063-T6 (Extruded) *

    * These materials have different physical properties and performance characteristics. Please contact us for design support.

    Related Resources

    Videos

    Technical Documents