P5501WT - 1-5/8" x 4 7/8", 12 Gage Back-to-Back, Slotted
|Part No.||Length (ft)||Finish||Product Weight / Ft (lbs/ft)|
|Beam Loading - P5501WT|
Max Allow. Uniform Load
Deflection at Uniform Load
|Uniform Loading at Deflection||Lateral Bracing Reduction Factor|
|24||* 5,220||0.01||* 5,220||* 5,220||* 5,220||1.00|
|36||* 5,220||0.04||* 5,220||* 5,220||* 5,220||1.00|
|Note||*Load limited by weld shear|
|Column Loading - P5501WT|
Load at Slot Face
|Max Column Load Applied at C.G.|
|K=0.65 (lbs)||K=0.80 (lbs)||K=1.0 (lbs)||K=1.2 (lbs)|
Elements of Section
|Elements of Section - P5501WT|
|Area of Section||1.452 in2 (9.4 cm2)|
|Axis 1-1||Axix 2-2|
|Moment of Inertia (I)||2.805 in4 (116.8 cm4)||0.669 in4 (27.8 cm4)|
|Section Modulus (S)||1.151 in3 (18.9 cm3)||0.823 in3 (13.5 cm3)|
|Radius of Gyration (r)||1.390 in (3.5 cm)||0.679 in (1.7 cm)|
- 10 feet: 10' or 10’ 1/8” (3.05m) ± 1/8" (3 mm)
- 20 feet: 20' or 20’ 3/8” (6.11m) ± 1/8" (3 mm)
- Available with a tolerance of ±1/8" (3 mm). Request quote.
- Many Unistrut channel sections can be supplied with a curve. Click here for our ordering form, specifications, and instructions.
- All beam and column load data pertains to carbon steel and stainless steel channels.
- Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
- Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
- Loads are based on 33 ksi steel cold formed to 42 ksi.
- Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
- Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
- For bearing loads, reference our bearing loads page.
- Welded channels are spot welded 2" (51 mm) or 3" (76 mm) on-center.
Materials & Finishes
Materials & Finishes - Standard:
- Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
- Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
- Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
- Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
- Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
- Plain (PL): Conforms to ASTM A1011 SS GR 33
- Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
- Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
- Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *
* These materials have different physical properties and performance characteristics. Please contact us for design support.