P6001B (Obsolete) - 13/16" x 1-5/8", 19 Gage Channel
This product is obsolete. See below for substitution options.
P7000: 13/16" x 13/32", 19 Gauge Single Channel
A3301: 1-1/4" x 1-1/2", 14 Gauge Back-to-Back Channel
P4101: 1-5/8" x 1-5/8", 14 Gauge Back-to-Back Channel
13/16" Channels
P7000: 13/16" x 13/32", 19 Gauge Single Channel
A3301: 1-1/4" x 1-1/2", 14 Gauge Back-to-Back Channel
P4101: 1-5/8" x 1-5/8", 14 Gauge Back-to-Back Channel
13/16" Channels
Part No. | Length (ft) | Finish | Product Weight / Ft (lbs/ft) |
---|---|---|---|
P6001B | 16 | PG | 0.73 |
P6001B | 10 | PG | 0.73 |
P6001B | 16 | HG | 0.774 |
P6001B | 10 | HG | 0.774 |
P6001B | 16 | GR | 0.73 |
P6001B | 10 | GR | 0.73 |
P6001B | 16 | PL | 0.73 |
P6001B | 10 | PL | 0.73 |
Elements of Section
Elements of Section - P6001B | ||
---|---|---|
Area of Section | 0.213 in2 (1.4 cm2) | |
Axis 1-1 | Axix 2-2 | |
Moment of Inertia (I) | 0.059 in4 (2.5 cm4) | 0.019 in4 (0.8 cm4) |
Section Modulus (S) | 0.073 in3 (1.2 cm3) | 0.047 in3 (0.8 cm3) |
Radius of Gyration (r) | 0.525 in (1.3 cm) | 0.300 in (0.8 cm) |
General Specifications
Standard Lengths:
- 10 feet: 10' ± 1/2" (13 mm)
- 16 feet: 16' ± 1/2" (13 mm)
Load Data:
- All beam and column load data pertains to carbon steel and stainless steel channels.
- Load tables apply only to UNISTRUT brand channel. Look for "UNISTRUT" on the product.
- Load tables and charts are constructed to be in accordance with the SPECIFICATION FOR THE DESIGN OF COLD-FORMED STEEL STRUCTURAL MEMBERS 2007 EDITION published by the AMERICAN IRON AND STEEL INSTITUTE USING ASD METHOD.
- Loads are based on 33 ksi steel cold formed to 42 ksi.
- Safety Factor to Yield Strength is 1.67 for Beam Loads and 1.80 for Column Loads.
- Beam loads are based on a simple beam and are given as a total uniform load (W) in pounds. For proper calculation procedures, refer to our Beam Load Calculation Guide.
- For bearing loads, reference our bearing loads page.
Welds:
- Welded channels are spot welded 2" (51 mm) or 3" (76 mm) on-center.
Materials & Finishes
Materials & Finishes - Standard:
- Pregalvanized (PG): Conforms to ASTM A653 SS GR 33, G90.
- Unistrut Defender (DF): Conforms to ASTM A1046 SS GR 33
- Hot Dip Galvanized (HG): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM A123
- Perma-Green (GR): Steel conforms to ASTM A1011 SS GR 33, E-Coat finish
- Perma-Gold (ZD): Steel conforms to ASTM A1011 SS GR 33, Finish conforms to ASTM B633, Type II SC3
- Plain (PL): Conforms to ASTM A1011 SS GR 33
- Stainless Steel, Type 304 (SS): ASTM A240, Type 304 *
- Stainless Steel, Type 316 (ST): ASTM A240, Type 316 *
- Aluminum (EA): ASTM B221, Type 6063-T6 (Extruded) *
* These materials have different physical properties and performance characteristics. Please contact us for design support.