UP-BK - Unipier Rooftop Support Base

UP-BK-No-Dimensions.png
Add to Project Download
Resources
Download
Cut Sheet
Part No.
UP-BK

    General Specifications

    • 8" x 8" polycarbonate base with a 3/8"-16 coupler. Saddle will accommodate 1-5/8" wide (standard) strut.
    • It is recommended to use a support pad or other sacrificial material between the base and the finished roof surface.
    • Suggested rooftop loading is not to exceed 2.0 psi from the base to the roof membrane or 100 lbs. (Effective surface area in contact with deck is 50 square inches).
    • Ultimate load to the base not to exceed 200 lbs.